Back to The Complete Knuckleheads Guide

CREATE PROPOSED CROSS SECTIONS

This process has completely changed with Geopak Road 2004 edition. Rather than use the traditional input file method, the Proposed Cross Sections are now created through Project Manager using Typical Section Generator.

Step ONE is to set up Project Manager (explained below).

SETTING UP PROJECT MANAGER
proj_man.html

Step TWO is to Create the Proposed Cross Sections.

Western Federal Lands now has 5 typicals to choose from. Each are explained below:

EXISTING FEATURES RIGHT OF WAY REHABILITATION (3R) UNDIVIDED NEW CONSTRUCTION AUTOMATED CROSS SECTION LABELING
exist_typ.html row_typ.html rehab_typ.html new_typ.html auto_lab_typ.html

 

 

 


Back to The Complete Knuckleheads Guide