Plotting the cross section sheets is now done with InterPlot Organizer.
Procedure:
Open the "destination" cross section file that contains all of the laid out cross sections and grid cells.
Invoke InterPlot Organizer, Start > Programs > InterPlot Utilities > InterPlot Organizer.
When the InterPlot Organizer dialog appears, select Create a new plot set from files you select and press OK.
The Create Plots dialog will appear as shown below, click on Add...:
Select the "destination" cross section file and press Open as shown below:
Select the settings file to use by clicking on the Browse... button in the Settings file name area as shown below:
There are several settings files available on the server in 2 locations, depending on what version of criteria and level libraries you are using, select either, (the settings files are actually exactly the same in each folder):
F:\V8_Resource\X_21\Standards\Set_Files\
F:\V8_Resource\X_30\Standards\Set_Files\
US Customary:
- 10 Scale Landscape.set
- 10 Scale Portrait.set
- 20 Scale Landscape.set
- 20 Scale Portrait.set
Metric:
- 100 Scale Landscape.set
- 100 Scale Portrait.set
- 200 Scale Landscape.set
- 200 Scale Portrait.set
In the example below I'll select the 200 Scale Portrait.set file:
After selection, press OK as shown below:
The InterPlot Organizer dialog will be populated with all the plot files. The files shown are the individual cross section sheets. Select the sheets you want to plot and press the printer icon, as shown below.
Back to The Complete Knuckleheads Guide
