Back
to The Complete Knuckleheads Guide
TO "ANNOTATE" THE HORIZONTAL ALIGNMENT:
Invoke the Design and Computation Manager by using the MicroStation
pull downs:
APPLICATIONS > GEOPAK ROAD > DESIGN & COMPUTATION MANAGER ...
or from the Road Tools icon as shown below:
-
Set the path in the "Design & Computation Manager" to one of
the following:
-
F:\Resource\Geopak\Ddbs\metric.ddb (for a Metric project)
-
F:\Resource\Geopak\Ddbs\english.ddb (for an English project)
If this is not the displayed path, then change it, as follows...
-
In the "Design and Computation Manager" dialog box click on FILE
and click on OPEN...
-
Select the appropriate path by double clicking under "Directories"
and "Files" until the "Name" and "Directory is correct.
-
If done correctly the "Design and Computation Manager" dialog box ".ddb
file path"should read as shown above:
NOW...
-
In the "Design and Computation Manager" dialog box, click on the Design
icon, as shown below:
-
Double click on Features.
-
Double click on Survey_lines.
-
Single click on BL Proposed Base/Centerlines (Rounded...example 12^20'30")
...
as shown below:
-
Single click on Draw Plan & Profile ... as shown below:
-
Key in or Select the Job Number ... as shown below and click
on OK (in both dialogs):
-
Toggle "Operation" to Stationing ... as shown below:
-
Select the chain with a single click.
-
FIT VIEW, using MicroStation.
--- The STATIONING, Tick Marks and Tick Labels SHOULD NOW BE DRAWN ---
Back to The Complete Knuckleheads Guide