Display Horizontal Alignment
Invoke the Design and Computation Manager by using the MicroStation pull downs:
APPLICATIONS > GEOPAK ROAD > DESIGN & COMPUTATION MANAGER ... or from the Road Tools icon as shown below:
Set the path in the "Design & Computation Manager" to one of the following:
The path (for office workstations) should be set as shown below: Browse to either the Metric or English folder and select the appropriate table file.
.X21 Generation of Criteria files/Level Libraries: .X30 Generation of Criteria files/Level Libraries: X:\V8_Resource\X_21\Standards\DDBS\Metric X:\V8_Resource\X_30\Standards\DDBS\Metric X:\V8_Resource\X_21\Standards\DDBS\English X:\V8_Resource\X_30\Standards\DDBS\English
If this is not the displayed path, then change it, as follows...
- In the "Design and Computation Manager" dialog box click on FILE and click on OPEN...
- Select the appropriate path by double clicking under "Directories" and "Files" until the "Name" and "Directory is correct.
- If done correctly the "Design and Computation Manager" dialog box ".ddb file path"should read as shown above:
NOW...
- In the "Design and Computation Manager" dialog box, click on the Design icon, as shown below:
- Double click on CHAINS/PROFILES.
- Double click on WFL.
- Single click on BL Proposed Base/Centerlines (Rounded...example 12^20'30") VERDANA TTF ... as shown below:
- Single click on Draw Plan & Profile ... as shown below:
- Key in or Select the Job Number ... as shown below and click on OK (in both dialogs):
- Toggle "Operation" to Chains ... as shown below:
- Set the Label Scale to 1000 for Metric and 100 for English.
- Select the chain with a single click.
- FIT VIEW, using MicroStation.